• IEEE 802.3af/at Power over Ethernet
  • Web Smart+ features provide easier manageability, basic security and QoS
  • Support 802.1d(STP), 802.1w(RSTP) and 802.1s(MSTP)
  • Support SNMP v1/v2c/v3
  • Support IGMP Snooping
  • Support IP Source Guard
  • DHCP Server
  • PoE Port configuration and scheduling
  • Support over current protection and circuit shorting protection
  • Wire-speed packet filtering and forwarding rate
  • 9216Bytes Jumbo frames
  • 8K Mac address
  • IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet
  • Standards
     IEEE 802.3 10Base-T Ethernet
     IEEE 802.3u 100Base-TX Ethernet
     IEEE 802.3ab 1000Base-T Ethernet
     IEEE 802.3z 1000Base-X Ethernet
     IEEE 802.3x Flow Control capability
     IEEE802.3az Energy Efficient Ethernet
     Port 1 to 24: RJ-45 10/100/1000Mbps with 802.3af/at PoE, auto MDI/X
     Port 25 to 26: SFP(100/1000Mbps) slot, uplink
     Reset Button
    Forwarding Capacity
     38.688 Mpps
    Switching Capacity
     52 Gbps
    Jumbo frames
     9216 Bytes
    MAC Table
     8K MAC addresses
    Spanning Tree Protocol (STP)
     Standard Spanning Tree 802.1d
     Rapid Spanning Tree (RSTP) 802.1w
     Multiple Spanning Tree (MSTP) 802.1s
     Link Aggregation Control Protocol (LACP) IEEE 802.3ad
     Static aggregation
     Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
     Port-based VLAN
     802.1Q tag-based VLAN
     Protocol based VLAN
     IP subnet-based VLAN
     Private VLAN Edge (PVE)
     MAC-based VLAN
     Q-in-Q (double tag) VLAN
     Voice VLAN
     GARP VLAN Registration Protocol (GVRP) (option)
    DHCP Relay
     Relay of DHCP traffic to DHCP server in different VLAN.
     Works with DHCP Option 82
    IGMP snooping
     IGMP limits bandwidth-intensive multicast traffic to only the requesters
     Supports 512 multicast groups
    IGMP Querier
     IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
    IGMP Proxy
     IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router
    MLD v1/v2 Snooping
     Delivers IPv6 multicast packets only to the required receivers
    Multicast VLAN Registration (MVR)
     It uses a dedicated manually configured VLAN, called the multicast VLAN, to forward multicast traffic over Layer 2 network in conjunction with IGMP snooping.
    Secure Shell (SSH)
     SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported
    Secure Sockets Layer (SSL)
     SSL Support: Encrypts the http traffic, allowing advance secure access to the browser-based management GUI in the switch
    IEEE 802.1X
     IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN , single/multiple host mode and single/multiple sessions
     Supports IGMP-RADIUS based 802.1X
     Dynamic VLAN assignment
    Layer 2 Isolation Private VLAN Edge (PVE)
     PVE (also knows as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks
    Port Security
     Locks MAC addresses to ports, and limits the number of learned MAC address
    IP Source Guard
     Prevents illegal IP address from accessing to specific port in the switch
     Supports RADIUS and TACACS+ authentication. Switch as a client
    Storm control
     Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
    DHCP Snooping
     A feature acts as a firewall between untrusted hosts and trusted DHCP servers
    Loop Protection
     To prevent unknown unicast, broadcast and multicast loops in Layer 2 switching configurations.
     Supports up to 384 entries. Drop or rate limitation based on:
     Source and destination MAC, VLAN ID or IP address, protocol, port,
     Differentiated services code point (DSCP) / IP precedence
     TCP/ UDP source and destination ports
     802.1p priority
     Ethernet type
     Internet Control Message Protocol (ICMP) packets
     TCP flag
    Hardware Queue
     Support 8 hardware queues
     Strict priority and weighted round-robin (WRR)
     Queue assignment based on DSCP and class of service
     Port based
     802.1p VLAN priority based
    Rate Limiting
     Ingress policer
     Egress shaping and rate control
     Per port
    Port mirroring
     Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported
    IEEE 802.1ab (LLDP)
     Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network
     Support LLDP-MED extensions
    Web GUI Interface
     Built-in switch configuration utility for browser-based device configuration
    Dual Image
     Independent primary and secondary images for backup while upgrading
     The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play
    DHCP Server
     Support DHCP server to assign IP to DHCP clients
    Remote Monitoring
     Embedded RMON agent supports RMON groups 1,2,3,9 (history,
    statistics, alarms, and events) for enhanced traffic management, monitoring and analysis
     SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)
    Firmware Upgrade
     Web browser upgrade (HTTP/ HTTPs) and TFTP
     Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched
    Other Management
     HTTP/HTTPs
     DHCP Client
     Cable Diagnostics
     Syslog
     Telnet Client; SSH
     IPv6 Management
    Port Configuration
     Supports per port PoE configuration function
    PoE Scheduling
     Supports per port PoE scheduling to turn on/off the PoE devices (PDs).
     Check the link status of PDs. Reboot PDs if there is no responses.
    Power Delay
     The switch provides power to the PDs based on delay time when PoE switch boots up, in order to protect switch from misuse of the PDs
    PoE Power Budget
     185W for RP-PG1526WL, 370W for RP-PG1526W
    Power Supply
     Internal Power supply 100~240VAC, 50/60 Hz
     Operating temperature: 0°C to 50°C
     Storage Temperature: -20 to 70°C
     Operating Humidity: 10% to 90% (Non-Condensing)
     W442 x D211 x H44mm
     FCC, CE

    Dosya bilgisi Boyut İndir
    Data Sheet 172.37 KB İNDİR

    Kategorideki Diğer Ürünler